Samsung Color Dual Quad Network Observation System SSC21WEB - Manual (Page 67)

Eng-67
3. Network Ports Configuration
It sets the HTTP Port number to use when the SSC21WEB Server communicates with a
Client PC.
The present SSC21WEB Server uses HTTP Port (80).
- HTTP Port
1) This is the port the Client PC uses to connect to the web page of the SSC21WEB Server.
Depending on the environment of the network, its value can be varied.
2) The fault values is 80 and it can be assigned up to 65535 maximum.
* If you change the value of the HTTP Port, you should type in the new one with the address
of the SSC21WEB Server in the address window of the web browser.
(Ex. If the IP address of the SSC21WEB Server is 192.168.1.100 and the HTTP Port :
8080, http://192.168.1.100:8080.)
3) Click Apply button to apply the present setting.
CAUTION
Set the port be used when connecting to SSC21WEB in internet Explorer.
The port setting is used for various network configuration when avoiding the network
where firewall constitutes or a particular port Etc.
SSC21WEB-3 2004.8.25 6:43 PM Page 67