Samsung Color Dual Quad Network Observation System SSC21WEB - Manual (Page 86)

Eng-86
Chapter 4: DISPLAY MODE setting method
4-1) SINGLE SCREEN DISPLAY
Initial display mode of monitor is QUAD A. In case users want to see the camera image at
full mode, select a target camera by turning œ œENTER√ √ SWITCH left and right. After that,
press the ENTER SWITCH and selected camera image will be displayed at full screen. If
users turn the œ œENTER√ √ SWITCH left / right at SINGLE DISPLAY MODE at this time,
they can see another camera image at full screen. For example, when users want to see CH1
at FULL MODE after SINGLE -displaying CH2 at QUAD A, please follow the instructions
below.
06/01/03 13:14:00
CH1 CH2
CH3 CH4
QUAD A
INITIAL DISPLAY STATUS
QUAD A
➯
➯
CH1
➯
Select CH2 by turning œ œENTER√ √ SWITCH
FULL SCREEN DISPLAY of CH2 FULL SCREEN DISPLAY of CH1
Press œ œENTER√ √
SWITCH after
selecting CH2
Display CH1
by turning
œ
œENTER√ √
SWITCH
06/01/03 13:14:00
06/01/03 13:14:00 06/01/03 13:14:00
CH1 CH2
CH1 CH2
CH2
SSC21WEB-3 2004.8.25 6:48 PM Page 86