Samsung DVD-HR720 - Manual (Page 22)

22 - English
C
onnecting & Setting up
Method 2 : Connecting to an
S-Video input jack
Connect an S-Video cable(not supplied) between the S-
VIDEO OUT jack on HDD & DVD RECORDER and S-
VIDEO IN jack on your TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
• Connect audio cables(white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
and AUDIO IN jacks on TV(or AV amplifier).
(See pages 23~24)
Method 3 : Connecting to
Component video input
jacks(Y,P
B
,P
R
)
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,P
B
,P
R
) jacks on
HDD & DVD RECORDER and COMPONENT
IN(Y,P
B
,P
R
) jacks on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUT jacks on the HDD & DVD RECORDER
and AUDIO IN jacks on TV (or AV amplifier). (See
pages 23~24).
3. After connecting, refer to the page 40 to 42.
• You will enjoy high quality and accurate color
reproduction images.
■ Make sure that the color coded
connections match. The Y, P
B
, P
R
component output jacks of your HDD &
DVD RECORDER must be connected to
the exact corresponding component input
jacks on your TV.
NOTE
2-HR720_XAC_18-25_CONNECT 5/17/05 9:52 PM Page 22