Samsung DVD-HR720 - Manual (Page 78)

78 - English
R
ecording
Recording from external
equipment you are watching
Check that the disc has enough available space for the
recording. Adjust the recording mode.
1
Press the HDD or DVD button.
If you select DVD, Press the OPEN/CLOSE button and
place a recordable disc on the disc tray. Press the
OPEN/CLOSE button to close the disc tray.
Wait until LOAD disappears from the front panel display.
If an unused DVD-RAM disc is used, whether to format
or not will be asked first. (See page 75)
If an unused DVD-RW disc is used, whether to initialize
or not will be asked first. (See page 75)
2 Press the INPUT button to select the input source
according to the connection you made.
The front panel display changes in the following
sequence:
➞ CH Number ➞ AV 1 ➞ AV 2 ➞ DV
If you connect a digital camcorder, press the INPUT
button to select DV. (See page 79)
3 Press the REC MODE button repeatedly, (or press
the REC MODE button, then press the …† buttons)
to select the recording speed (quality).
➞ SP ➞ LP ➞ EP ➞ XP
4
Press the REC button.
Information concerning the external input mode is
displayed on the screen, then recording begins.
Icon( ) is displayed on the front panel.
- To pause recording -
• Press the REC PAUSE button to pause a recording
in progress.
• Press the REC PAUSE button again during pause to
resume recording.
• You can switch channels by pressing the
CH ( ) buttons while recording pauses.
- To stop recording -
Press the STOP ( ) button to stop or finish a
recording in progress.
• When using DVD-RAM/-RW/-R discs, the
message “Updating the information of disc. Please
wait for a moment” is displayed.
Before you start
Record Mode SP 031:39
6-HR720-XAC_74-89_REC 5/17/05 10:05 PM Page 78