Samsung DVD-HR720 - Manual (Page 84)

84 - English
R
ecording
• TITLE : To label the title name, select the title and then
press the ENTER button.Title renaming screen appears.
See page 91 for the registration.
4 After selecting the set up value for each mode, press the
ENTER button to select Save, and press the ENTER
button again.
• will appear on the front panel. It means that a
timer recording is registered.
If the timer settings overlap;
The programs are recorded in order of priority.
If timer recording is set for the first program and
then again for the second program and both
programs overlap, the following message will
appear on the screen: “This setting is identical with
1.” The message shows that the first program
has priority. After recording of the first program is
complete, the second program starts being
recorded.
To exit without saving the current setting
Press the MENU button.
To return to the previous menu
Press the RETURN button if you don’t want to set a
timer recording.
5 When you want to recording on DVD-RAM/-RW/-R,
you must insert the disc.
6 Press the MENU button to finish the Timer Recording
setting.
Flexible Recording
(for Timer recording only)
In FR mode, the most suitable record mode is adjusted
automatically, according to remaining time on the disc
and length of the timer recording. This function is
selected only one mode in XP, SP, LP and EP modes
and you can use this mode for timer recording.
The FR mode recording setup is the same as Timer
Recording. When setting the mode in step 4, set the FR
mode.
■ The timer recording time may differ from
the set time depending on disc status and
overall timer recording status (for example,
recording times overlapping, or when the
previous recording ends within 2 minutes
before the start time of the next recording.)
■ You can make the Timer Recording up to
12 programs.
■ If HDD disk has no available recording
space, blinks. It means that HDD disk
has no space to record.
NOTE
6-HR720-XAC_74-89_REC 5/17/05 10:05 PM Page 84