Silicon Laboratories Network Card - Manual (Page 13)

Ethernet-DK
Rev. 0.6 13
5. Verify the Compiler and Linker tabs are pointing to the C51.exe (compiler) and BL51.exe (linker) files in
C:\Keil\C51\BIN in the Executable field.
6. Press the Compiler tab's Customize button. Under the Variable Location drop down box, select Large:
XDATA and press OK. Then press OK to close the Tool Chain Integration dialog.
7. Build the project. This can be done by clicking on the Build/Make Project button in the toolbar, selecting
Project
Build/Make Project from the menu, or pressing the F7 shortcut key.