Sony CMT-CPZ1 - Manual (Page 20)

20 GB
You can record just the portions you like from a
CD or radio program on a tape.
You can also record from connected
components (see “Hooking up optional
components” on page 26).
Use buttons on the unit for the operation.
1
Load a recordable tape.
2
Press FUNCTION repeatedly to switch
the function to TAPE.
3
Press DIRECTION repeatedly to select
“g” to record on one side. Select
“h” or “j” to record on both sides.
4
Press TAPE
nN repeatedly to select
recording side, then press TAPE
x.
If you select both sides recording or front
side recording, press TAPE
nN
repeatedly to light up the
N indicator, then
press TAPE
x. If you record on the reverse
side, press TAPE
nN repeatedly to light
up the
n indicator, then press TAPE x.
5
Press FUNCTION repeatedly to select
the desired source to record.
• CD: To record from this system’s CD
player.
• TUNER: To record from this system’s
tuner.
• MD: To record from the optional
component connected to the ANALOG
IN jack.
6
Press TAPE
z REC.
“REC” and “
N” light up and the tape deck
stands by for recording.
7
Press TAPE
X, then start playing the
desired source to record.
Recording starts.
Other operations
Notes
• You cannot listen to other sources while recording.
• Recording stops if you change the function to another
one.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the tuner:
If noise is heard while recording from the tuner,
move the respective antenna to reduce the noise.
Recording on a tape
manually
— Manual Recording
To Do this
Stop recording Press TAPE
x.
Pause recording Press TAPE
X.
* * & GI