Sony CMT-CPZ1 - Manual (Page 34)

34 GB
Tape deck section
Recording system 4-track 2-channel stereo
Frequency response 50 – 13,000 Hz (±3 dB),
using Sony TYPE I
cassettes
Wow and flutter ±0.15% W. Peak (IEC)
0.1% W. RMS (NAB)
±0.2% W. Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range 87.5 – 108.0 MHz
(50 kHz step)
Antenna FM lead antenna
Antenna terminals 75 ohms unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
European, model:
531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
Other models: 531 – 1,602 kHz
(with the tuning interval
set at 9 kHz)
530 – 1,710 kHz
(with the tuning interval
set at 10 kHz)
Antenna AM loop antenna
Antenna terminals External antenna terminal
Intermediate frequency 450 kHz
Speaker
Speaker system 2-way, bass-reflex type
Speaker units
Woofer:
13 cm dia., cone type
Tweeter: 2.5 cm dia., soft-dome-
type
Nominal impedance 4 ohms
Dimensions (w/h/d) Approx. 160 Ч 240 Ч
265 mm
Mass Approx. 3.2 kg net per
speaker
General
Power requirements
European model:
230 V AC, 50/60 Hz
Other models: 220 – 240 V AC, 50/60 Hz
Power consumption
European model:
60 watts
0.3 watts (in Power Saving
mode)
Other models: 60 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 175 Ч 240 Ч
295 mm
Mass (excl. speakers)
Amplifier/Tuner/Tape/CD section:
Approx. 3.8 kg
Supplied accessories Remote Commander (1)
R6 (Size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Speaker pads (8)
CD-ROM (SonicStage) (1)
SonicStage Installation/
Operating Guide (1)
US and foreign patents licensed from Dolby
Laboratories.
Design and specifications are subject to change
without notice.
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not
used in the certain printed wiring boards.
• Lead-free solder is used for soldering
certain parts.
• Halogenated flame retardants are not
used in cabinets.
* * & GI