Siemens A40 - Manual (Page 29)

28
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Setup
Divert
This network feature diverts unan-
swered calls to another phone or to
your mailbox.
[Menu] „ Setup „ Divert
For how to set a simple divert for unan-
swered calls (
¼ p. 21).
For other ways to implement a divert
(
¼ p. 37).
Setting Divert
[Menu] „ Setup „ Divert „ All unanswered
[Check] Press; the current setting is
checked.
or
[Change] Switch divert on/off.
If a destination number is stored, this
is displayed.
If you wish to retain the destination
number:
[OK] Confirm.
If you wish to enter a new destination
number:
? Delete the old number.
F /
% Enter the new destination
number or dial from the
Phonebook.
[OK] Confirm entry.
Divert On appears after each call as a
reminder (dependent upon the serv-
ice provider).
, Clearing Divert
[Menu] „ Setup „ Divert „ All unanswered
[Check] Press (if offered). The cur-
rent setting is checked.
or
[Change] Switch Divert off.
Check Divert
Divert network functions may not al-
ways match your display
(e.g. if you change the SIM card).
[Menu] „ Setup „ Divert „
Check Status
[Select] Press. The current network
status is displayed.
Clear all Diverts
[Menu] „ Setup „ Divert „
Clear Diverts
[Select] Press.
Active Line:
If the SIM card or service provider
supports an alternative line, then sep-
arate settings can be made for each
number (e.g. ringers, call divert, etc.).
The relevant call number must be acti-
vated for this purpose (
¼ p. 10).