Insert and charge battery, Switch telephone on, Emergency call – Siemens A40 User Manual

Page 8: Getting started, Insert and charge battery

Advertising
background image

7

07.05.2001

B35_02_main.f

A40 englisch A31008-H4400-A1-1-7619

Getting Started

3. Insert and Charge
Battery

To Insert the Battery

• Insert the battery as indicated below

(contacts on top end).

• Refit the cover, ensure the top end

is flush before pressing it closed
(until it clicks).

To Charge the Battery:

Your new battery will not be fully
charged:

• Insert the plug into the charger into

the socket in the phone
(see illustration below).

• Plug the charging unit into the mains

power socket (first checking the rat-
ed voltage of the charging unit).

K The charging progress is shown

on your display. You may use
your phone whilst charging.

J

Charging complete.

Battery is fully charged.

• To release, squeeze the arrows on

the plug together and remove.

.

4. Switch Telephone On

8

Hold down to switch on.

If Insert SIM Card is displayed, check
that the SIM card is correctly inserted
(

¼

p. 32).

5. Emergency Call

You can contact the emergency servic-
es at any time even without a SIM
card. Simply dial 112 (999 in the UK).

Charging Time
Allow at least 3 hours for your first
few charges. 1.5 - 2 hours are enough
after this.

Usage Time
A full charge can provide from 60 to
150 hours standby, or from 90 to 240
minutes talk time (depending on use
and network conditions).

A beep sounds when the battery
needs charging.

Advertising