Samsung SCC-C6475P - Manual (Page 39)

3-50
E
3-49
Transfer Setup
● Set SMTP, FTP to transfer the image in alarming.
● Transfer Image Setup
- Set the image file name to transfer. (Max. 16 characters)
- Able to add alarm event name, time information to the file name as a value-
added information.
Ex) AlarmImage_[INPUT]_[20050317_093715]_[pre5].jpg
● Transfer Mode Setup
1. FTP Transfer
- Passive Mode: Use this mode if necessary to access as a Passive mode
because of using firewall or setting FTP server.
- Enter available FTP server IP to transfer the alarm image.
- Upload Path can be transferred to the top directory of the FTP server
account unless setting or user can transfer by entering the specific
directory route.
- “/directory name” or “directory name” would be OK for the route setting.
- FTP server port is set for 21 basically and is changeable for the user
server setting.
- Enter the ID and Password to access the FTP server.
❖
Alarm
Alarm Setup
● Enable the Transfer Alarm Image, transfer the alarm image according to the
set value when alarming.
● Able to select alarm event to transfer the image.
- Input port – Transfers the image for the alarm through the camera Input port
- Manual – Transfers the image when the user click the Manual button in the
Main screen directly.
- Schedule – Transfers the image automatically according to the schedule
that the user had set.
● Pre/Post Alarm Setup
- Able to set the image pages to transfer per second. (1~5 pages)
- Pre Alarm – Able to transfer the image up to 30 seconds before when the
alarm begins. (Maximum seconds can be changed up to the transfer image
pages per second).
- Post Alarm – Able to transfer the image up to 30 seconds after when the
alarm begins. (Maximum seconds can be changed up to the transfer image
pages per second).
2. E-mail Transfer
- Enter the E-mail server address.
- Enter the ID and password to access to the E-mail
- Enter the E-mail address of sender
- Enter the E-mail address to receive the alarm e-mail.
- Enter the title and simple contents.
Apply: If the setup is applied, the camera performs the FTP, SMTP image
transfer test by itself. If the test fails, an error message is displayed.
(Server connection error, Login error, etc.)