Convertible antenna cable routing procedure – Sirius Satellite Radio SIRIUS STILETTO 2 Model SLV2 User Manual

Page 106

Advertising
background image

03

Additional Information

Convertible Antenna Cable Routing Procedure

To route the antenna cable in a convertible follow these detailed cable installation
instructions.

6. Bring Cable Out To

Docking Station

Location and Connect

to the Docking Station

1. Bring Cable from

Antenna Into Inside

of Trunk Lid

2. Tape Cable Along

Inside of Lid to

Hinge Strut

4. Route Cable from Trunk

Under Interior Trim, into

Cabin and Towards Front

of Vehicle

5. Bring Cable out from

Trim and Route Under

Carpet to Dashboard

or Console.

3. Tie Cable to Hinge Strut, Allowing

Slack for Lid to Open and Close.

Route Cable Into Cabin

Through Existing Wire

Channel.

Bring the cable from the antenna into the trunk at the front edge of the trunk lid. Keep
any bends in the cable loose. Tape or tie the cable along the inside of the trunk lid to
the trunk lid hinge strut.

Allow enough slack in the cable so the trunk lid can easily open and close and keep the
cable away from hinges, gears, etc., that could crimp or cut it. Route the cable along

1.

2.

Advertising