Sirius Satellite Radio SIRIUS STILETTO 2 Model SLV2 - Manual (Page 98)

95
Additional Information
As shown in the following illustration, peel the protective material from the adhesive
strips and press the rubber cover/tail firmly into place on the vehicle.
Rubber Cover/Tail
Protective Material
Adhesive Strips
Strain Relief
Antenna Cable
Double check that the location of the antenna and rubber cover/tail are correct, and
continue to press firmly down on rubber cover/tail for another 30 seconds. At room
4.
5.
Attach Rubber Cover/Tail
Remove Adhesive Strips
Attach Rubber Cover/Tail
Remove Adhesive Strips
Press Firmly in Place on Vehicle