Sanyo DIR-2000 - Manual (Page 5)

5
Convenient Features:
◆ Dual Tuning Systems
DTV terrestrial digital ATSC (18 formats)
NTSC analog (Cable 1~125), (VHF/UHF)
◆ Audio formats: Dolby Digital for DTV and analog for NTSC
◆ NightScan automatically updates DTV channels
Menu System Adjustments:
◆ Picture adjustments–Aspect Ratio: 4:3 format and 16:9 format
◆ Picture Shape: Normal, Letterbox, Cropped, Stretch, and Expand
◆ Scan Mode: Interlaced and Progressive (for 480i/p televisions)
◆ Automatic Channel Search for both tuners (DTV and NTSC)
◆ Channel Scan Memory
◆ Initial Channel
◆ Channel Display Banner (Full and Brief)
◆ Auto or Manual Clock setting
◆ Digital Audio Output: S/P DIF and PCM
◆ Trilingual Menu Options
On-Screen Displays (OSD):
◆ Channel Display Banner Information (Full and Brief)
◆ Channel Map listing of all channels
◆ Closed-Captioning
◆ XDS (Extended data service) station call letters,
title of show, and rating
◆ Audio Modes: DTV—Main and Sub
NTSC—Stereo, Mono, and SAP
◆ DTV signal quality to aid antenna orientation
◆ V-Guide rating limits: Movies and TV guidelines
Power Requirement:
◆ Source: AC 120V, 60Hz
◆ Consumption: Approximately 21 Watts
Controls and Indicators:
◆ Front Panel Indicators: Power, 480P, DTV, and 4:3
◆ Front Panel Keys:
Power Channel (up-down) Enter
Menu Cursor (left-right) Reset (CPU)
◆ Remote Control Keys:
Mode Selection Power Display
0~9 number keys Enter Caption
Menu Recall Audio
Pix Shape CH Map Tuner
V-Guide (–) Sub Channel
Volume/Cursor (left-right)
Channel/Cursor (Up/Down)
Reset (factory settings)
Auxiliary control keys
Jacks and Connectors:
◆ 1 – NTSC Input F-Connector, 75 ohm
◆ 1 – DTV (ATSC) Input F-connector
◆ 1 – RF Output F-connector with Ch3–4 switch
◆ 2 sets – Audio/Video Outputs (A/V-1, A/V2)
◆ 2 – S-Video Outputs (S-1, S-2)
◆ 1 – Component Output (Y-Pb-Pr)
◆ 1 – Digital Audio Output (Optical S/P DIF or PCM)
Accessories (Included) :
◆ Multimedia Remote (SDB/TV/VCR/DVD)
◆ Coaxial RF Cable
◆ Audio Video Cable (phono-type)
◆ S-Video Cable
◆ Component Cable
◆ Quick ‘N Easy Startup Guide
Size and Weight (approximately):
◆ Size: Horizontal Dim. (Width): 13.1 in. (332.7mm)
Vertical Dim. (Height): 2.7 in. (69.1mm)
Depth Dim. (Thickness): 11.0 in. (278.1mm)
◆ Weight: 6.46 (lbs), 2.9 (Kg)
Features and Specifications
Trademarks Information:
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Contains iType ™ font rendering technology from Agfa Monotype Corporation. “The Type software used in this product are under
license from Agfa Monotype Corporation and cannot be extracted for any other use.”
is a federal registered trademark of Zentek Technologies, Inc.
This product is subject to continuous improvement, resulting in the design and
specifications to change without notice. The weight and dimensions shown are
approximate measurements.