Seagate BARRACUDA 2LP ST31250W/WD/WC/DC - Manual (Page 33)

Barracuda 2LP Installation Guide, Rev. E 31
Systemgehäuse nicht an die HDA/PCB-Erdung
anschließen wollen, müssen Sie das Laufwerk auf
nichtleitende Weise (galvanisch isoliert) im Host-
System einbauen. Die daraus u.U. resultierende
verstärkte elektromagnetische Strahlung fällt in
den Zuständigkeitsbereich des Systemdesigners.
5. Replace the host system’s cover.
5. Setzen Sie das Gehäuseoberteil des Host-Systems
wieder auf.
Formatting the drive
Warning. Formatting a drive erases all user data. Be
sure that you understand this principle before
formatting any hard disc drive.
It is not necessary to format a drive which has
previously been used to store data, unless
your intention is to erase all user data.
1. Turn on DC power.
2. Boot the system from a system floppy disc or from a
previously installed hard disc drive if there is one.
3. Format the disc drive. The Barracuda 2LP disc drive
is designed to operate with a variety of operating
systems; therefore, please refer to your system or
SCSI controller manual for information about format-
ting and setting up the drive.