Shure M367 User Manual

Model m367 user guide, Six channel microphone mixer

Advertising
background image

Model M367 User Guide

©2008 Shure Incorporated
27C8511 (Rev. 5)

Printed in U.S.A.

SIX CHANNEL MICROPHONE MIXER

DESCRIPTION

The Shure M367 is a portable, six-input, two-output (mono),

battery-powered microphone and line level mixer/preamplifier. Its

transformer-isolated design, low-noise performance, and compact

and rugged construction make the M367 an ideal choice for studio

and mobile broadcast, electronic news gathering (ENG), and

electronic field production (EFP) applications.

This versatile mixer can also be used for the following:

Digital transmission links

Digital video/audio recording media (ISDN, hard disk

recording, and DAT)

Sound reinforcement

The M367 comes with rubber feet, detachable power cord, and

spare power line fuse. It can be rack mounted using the optional

Model A367R rack mount kit.

FEATURES

Six selectable mic/line inputs

Selectable mic/line output and dedicated line output

Transformer-balanced inputs and outputs for superior rejection

of RFI and electromagnetic hum

Professional mechanical VU meter–LED backlighting for high

reliability, no lamp replacement

Headphone monitoring 3.5 mm, (1/4 in.)

Output peak limiter with switchable threshold and bi-colored

LED indicator

Peak indicator LED, and switchable low-cut filters on each input

1/4 in. return monitor input

AC power or (2) 9V battery operation

ADDITIONAL FEATURES

48 Vdc or 12 V phantom power for condenser microphones

1 kHz tone oscillator
• Mutes all input channels when activated
• Tone level control is on the master

Wide–range input gain controls handle hot signal levels without

attenuators

Customized operation via internal DIP switches, trim pots, and

optional alternate wiring

Battery check switch and low battery warning indication

Power-on LED

Input expansion via mix bus jack to link M367s or other mixers

Rugged all metal chassis with protective end caps

Detachable AC power cord

! IMPORTANT SAFETY INSTRUCTIONS !

1.

READ these instructions.

2.

KEEP these instructions.

3.

HEED all warnings.

4.

FOLLOW all instructions.

5.

DO NOT use this apparatus near water.

6.

CLEAN ONLY with dry cloth.

7.

DO NOT block any ventilation openings. Install in accordance with the manu-
facturer's instructions.

8.

DO NOT install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.

9.

DO NOT defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wider blade or the third
prong are provided for your safety. If the provided plug does not fit into your out-
let, consult an electrician for replacement of the obsolete outlet.

10.

PROTECT the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

11.

ONLY USE attachments/accessories specified by the manufacturer.

12.

13.

UNPLUG this apparatus during lightning storms or when unused for long periods of
time.

14.

REFER all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is dam-
aged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.

15.

DO NOT expose the apparatus to dripping and splashing. DO NOT put objects filled
with liquids, such as vases, on the apparatus.

16.

The MAINS plug or an appliance coupler shall remain readily operable.

17.

The airborne noise of the apparatus does not exceed 70dB (A).

18.

Apparatus with CLASS I construction shall be connected to a MAINS socket outlet
with a protective earthing connection.

19.

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or

moisture.

20.

Do not attempt to modify this product. Doing so could result in personal injury

and/or product failure.

USE only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.

Advertising