Samsung BN68-01783B-00 - Manual (Page 14)

English - 14
Storing Channels Automatically
You can scan for the frequency ranges available to you (availability depends on your country).
Automatically allocated programme numbers may not correspond to actual or desired programme
numbers. However you can sort numbers manually and clear any channels you do not wish to watch.
1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Channel, then press the
ENTER button.
3 Press the ▲ or ▼ button to select Auto Store, then press
the ENTER button.
4 Press the ▲ or ▼ button to select the channel source to
memorize. Press the ENTER button to select Start.
®
Digital & Analogue: Digital and Analogue channels.
Digital: Digital channels.
Analogue: Analogue channels.
5 Press the ▲ or ▼ button to memorize the channels of the
selected connection, then press the ENTER button.
®
Air: Air antenna signal.
®
Cable: Cable antenna signal.
®
Scans for all channels with active broadcast stations
and stores them in the TV’s memory.
®
If you want to stop Auto Store, press the ENTER button.
The Stop Auto Store? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press
the ENTER button.
Digital & Analogue / Digital
6 The update procedures differ depending on the selected
Country.
Update the channel list by selecting an appropriate option.
When the “Country” was set to “Finland”
Press the ▲ or ▼ button to select Cable or Air. Press the
ENTER button.
Press the ENTER button to select Start.
- Cable: Scans cable channels.
- Air: Scans aerial channels.
®
at the same time.
®
be displayed.
®
when the channel list is updated.
When the “Country” was set to “Sweden”, or “Denmark”
Press the ▲ or ▼ button to select Cable or Air.
Press the ENTER button.
When selecting “Cable”:
- Frequency: Displays the frequency for the channel.
(Differs in each country)
- Modulation: Displays available modulation values.
- Symbol Rate: Displays available symbol rates.
- Network ID: Displays the network identification code.
Press the red button to start the scan for digital services.
When it has finished, channels are updated in the channel list.
When selecting “Air”:
Press the ENTER button to select Start.
When the “Country” was set to “Norway”
Press the ENTER button to select Start.
7 Press the EXIT button to exit.
®
When there is a locked channel by Child Lock setting, PIN input screen appears.
(refer to page 26)
Channel Country
Auto Store ►
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Channel Mode : Added Ch.
Fine Tune
Select the Antenna source to memorize.
Digital & Analogue
Digital
Analogue
Auto Store
Move
Start
Start
Start
Enter Return
Auto Store
Auto Store in progress.
Digital Channels : 0
Analogue Channels : 0
Stop
Enter Return
143 MHz
0%
Auto Store
Auto Store is completed.
Digital Channels : 20
Analogue Channels : 36
Enter
OK
Return
Auto Store
Select the Antenna source to memorize.
Cable
Air
Start
Enter Return
Start
Move
Auto Store
Return Adjust Move
1 4 3 0 0 0 k H z
Frequency
9 9 9
Network ID
6 8 7 5 k S / s
Symbol Rate
QAM 64
Modulation
iu]_TWX^_ZiTl•ŽU•‹‰GGGX[ YWW_TW`TY\GGG㝘㤸GXXaZ`aZX