Samsung BN68-01783B-00 - Manual (Page 67)

English - 67
Scanning and Switching between Anynet+ Devices
1 Press the TOOLS button.
Press the ENTER button to select Anynet+ (HDMI-CEC).
2 Press the ▲ or ▼ button to select Device List, then press
the ENTER button.
®
Anynet+ devices connected to the TV are listed.
If you cannot find a device you want, press the red button
to scan for devices.
®
Only when you set Anynet+ (HDMI-CEC) to On in the
Setup menu, the Device List menu appears.
3 Press the ▲ or ▼ button to select a particular device and
press the ENTER button. It is switched to the selected
device.
®
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during
the switching operation.
®
The time required to scan for devices is determined by the number of connected devices.
®
When the device scan is complete, the number of devices found are not displayed.
®
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is already on are not displayed in the device list. In this case, press the red
button on the remote to search devices.
®
If you have selected an external device by pressing the SOURCE button, you cannot use the Anynet+
function. Make sure to switch to an external Anynet+ device by using the TOOLS button.
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected
to the TV.
Anynet+ Menu Description
View TV Anynet+ mode changes to TV broadcast mode.
Device List Shows the Anynet+ device list.
(Device_Name) Menu Shows the connected device menus.
E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will
appear.
(Device_Name)
Operation Shows the play menu of the connected device.
E.g. If a DVD recorder is connected, the play menu of the DVD recorder will
appear.
Record: (*recorder) Starts recording immediately using the recorder. (This is only available for
devices that
support the recording function.)
(*recorder) Reserve
Recording Enables reserving a recording for the recorder. (This is only available for
devices that support the recording reservation function.)
Stop Recording:
(*recorder) Stops recording.
Receiver Sound is output through the receiver.
®
If more than one recording device is connected, they are displayed as (*recorder) and if only one
recording device is connected, it will be represented as (*device_name).
Continued...
Return Enter Move
View TV
Device List
Recording : DVDR
DVDR Operation
Receiver : On
Setup
iu]_TWX^_ZiTl•ŽU•‹‰GGG]^ YWW_TW`TY\GGG㝘㤸GXXa[Wa\`