Samsung BN68-01783B-00 - Manual (Page 35)

English - 35
Selecting the Sound Mode
(depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the
current transmission.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Press the ▲ or ▼ button to select Dual I-II.
3 Press the ◄ or ► button to select the required option.
4 Press the EXIT or TOOLS button to exit.
Type of broadcast On-screen indication
NICAM
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Regular + NICAM
Mono
NICAM
Mono
(Normal)
NICAM-Stereo
NICAM
Stereo
Mono
(Normal)
NICAM Dual-I/II
NICAM
Dual-1
NICAM
Dual-2
Mono
(Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Zweisprachig oder
Dual-I/II
Dual I Dual II
Stereo Stereo
Mono
(Forced mono)
¯


If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.


If the stereo signal is weak and automatic switching occurs, switch to Mono.


This function is only available in TV mode.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program without
disturbing other people in the room.
¯
When you insert the head set jack into the corresponding
port, you can operate only
DTV : Audio Language,Audio Format, Audio Description,
Select Speaker, Sound Reset
ATV : Select Speaker, Sound Reset
PIP : Sound Select, Sound Reset in Sound menu.
¯
Prolonged use of headphones at a high volume may
damage your hearing.
¯
You will not hear sound from the speakers when you
connect headphones to the TV.
¯
The headphone volume and TV volume are adjusted
separately.
TV Side Panel
Tools
Anynet+ (HDMI-CEC)
Picture Size : Auto Wide
Picture Mode : Standard
Sound Mode : Standard
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
Dual I II ◄ Mono ►
Move Adjust Exit
15
iu]_TWX^_ZiTl•ŽU•‹‰GGGZ\ YWW_TW`TY\GGG㝘㤸GXXaZ`a[\