Smarthome NSTEON KEYPADLINK 2486D - Manual (Page 37)

INSTEON KeypadLinc V2 Dimmer User’s Guide
Mechanical
Button Type 6 or 8 mechanical momentary contact type buttons
Button Appearance Transparent plastic caps, holding preprinted or custom button labels, with LED
backlighting
Wire Nuts 3 included
Mounting Mounts in single or multiple-ganged junction box.
Controls 200 watts less load for each immediately adjacent electronic
dimmer installed. For example, 600 watt load capacity becomes 400 watt
with another electronic dimmer installed to the immediate right or left. Use
a triple-gang box with a mechanical switch in the center to avoid de-rating.
Operating Conditions Indoors, 40 to 104°F, up to 85% relative humidity
Dimensions 4.1” H x 1.8” W x 1.2” D
Weight 3.6 oz
Electrical
Supply Voltage 120 Volts AC +/- 10%, 60 Hertz, single phase
Surge Protection MOV rated for 150 Volts
Power Wire Leads 6”, 16 AWG, stranded,
600V, 105
°C insulation, ends stripped and tinned,
LINE (black), LOAD (red), NEUTRAL (white)
Ground Lead 6”, 18 AWG, stranded, bare copper
Load Types Wired-in incandescent lighting devices
Maximum Load 600 Watts (uses 12-Amp triac dimmer)
Minimum Load No minimum load required
Certification Safety tested for use in USA and Canada (ETL #3059287-001)
Page 37 of 38