Samsung SPH-20W/P - Manual (Page 4)

4 OUTDOOR DOME HOUSINGS 5 OUTDOOR DOME HOUSINGS
Durable engineered plastic top, 94VO, outdoor and
pressurized models are UV protected.
Accepts many manufacturers’ unitized camera systems.
Accepts single fixed camera.
Available in wall or pendant mount.
Temperature rating -50 F standard.
DESCRIPTION:
All plastic components are designed to be UV stable; the housing top is
rated at 94VO. The wall mountunit measures 11.5" (w) x12.9 (h) x 16"
(d), with a weight of 7 lbs.; measurements for the pendant mount unit
are 11.5" (w) x 12.9" (h) x 11.5" (d), 7 lbs. Flying leads are provided for
all incoming power, control, and video connections. The leads are
supplied with a standard BNC and screw down connectors. A 22 watt
heater and a circulation blower are also provided. To service, remove
the lower dome and ring assembly.
FEATURE ELECTRICAL SPECIFICATIONS:
Input power : Housing & Camera - 12 VDC
22 watts at 12 VDC
Heater : 20 watts
Blower : 2 watts
GENERAL INSTRUCTIONS:
Tools Required: .100" Flat Head Screwdriver
Phillips Head Screwdriver
PREPARING PENDANT MOUNT BRACKET
(For wall mount see page 7)
1. Carefully remove the housing from the packaging material.
Check to be sure all parts are present.
2. This unit includes a 1 1/2" NPT housing coupling that can be used with a
standard 1 1/2" NPT pipe.
3. Attach the housing coupling to the bracket or pendant pipe (Figure 1).
NOTE
Notes
· This unit can be used with brackets designed with 1 1/2" male pipe
threads that don’t be supplied.
· Pipe threads should be clean and rust free. Use a sealer (such as
Teflon™ tape or silicone sealer) on the threads.
NOTE
Notes
· The heater activates at 40 F ( 8 F), deactivates at 60 F ( 8 F).
· The blower always activates.
Figure 1
Add thread
sealing tape
Be sure the bracket is properly and securely mounted to a supporting
structure capable of rigidly holding the weight of the entire unit.