Samsung SPH-20W/P - Manual (Page 6)

9 OUTDOOR DOME HOUSINGS 8 OUTDOOR DOME HOUSINGS
ETHERNET CONECTION (RJ45 CONNECTOR)
WIRING COLOR CODE
POWER AND CONTROL INPUTS (SPH-20W/P)
10 RXD (RS232) Blue
11 TXD (RS232) Violet
12 S1 + Gray
13 S1 - Orange
14 S2 + Brown
15 S2 - Tan
RS232 & Digital Alarms
1 Accessory Power (24 VAC) Yellow
2 Accessory Power (24 VAC) Green
3 N/A
4 N/A
Housing (Power 24 VAC)
1 Camera Power (+12 VDC) Red
2 Camera Power (Ground) Black
3 SYNC (Camera Power) White
4 N/A
Camera (Power 12 VDC)
RS-485
1 Data + Gray
2 Data - Violet
3 Ground Blue
4 N/A
FOR PENDANT MOUNT VERSIONS
1. Mount the housing assembly to the mounting bracket and housing coupling. A
safety cable is included with the housing to temporarily hold it while making
wiring connections. Loop the safety cable over one of the set screws on the
housing coupling and make the appropriate connections using the (2) screw-
down connectors supplied.
2. Undo the safety cable and twist the housing onto the housing coupling.
Secure all (3) setscrews provided on the housing coupling (Figure 4).
3. Clean the outside of the dome with the text wipe provided.
WIRING COLOR CODE
POWER AND CONTROL INPUTS (SWH-20W/P)
Figure 4
Twist and
Secure
1 Accessory Power (+12 VDC) Red
2 Accessory Power (Ground) Black
3 N/A
4 N/A
Housing (Power 12 VDC)
1 Camera Power (+12 VDC) Red
2 Camera Power (Ground) Black
3 SYNC (Camera Power) White
4 N/A
Camera (Power 12 VDC)