Deactivating the lock mode temporarily, Activating/deactivating the rf signal, Adjusting the audio channels – Sennheiser SR 2050 IEM User Manual

Page 15

Advertising
background image

Using the transmitter

14

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the “

Auto Lock

” menu item. If the

lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:

The lock mode icon

flashes prior to the lock mode being activated again.

Activating/deactivating the RF signal

To

deactivate

the RF signal:

To

activate

the RF signal:

To

deactivate the RF signal

on

switch-on

:

̈

See “offline operation” on page 13.

Adjusting the audio channels

Via the “

Mode

” menu item, you can adjust the audio channels.

̈

Select “

Stereo

” if you want to transmit two separate audio signals on channel I and

channel II (e.g. channel I

= audio signal of the presenter/musician, channel II

= sum of all

audio signals).
This allows the presenter/musician to adjust the balance between the left and right stereo
signal on his receiver.

̈

Select “

Mono

” if you only want to transmit an audio signal on one channel. In this case,

the signal from the left audio input

BAL AF IN L (I)

ƺ

is transmitted.

̈

Press the jog dial.

Locked

” appears on the display panel.

̈

Turn the jog dial.

Unlock?

” appears on the display panel.

̈

Press the jog dial.
The lock mode is temporarily deactivated.

– When you are in the operating menu, the lock mode remains deactivated until

you exit the operating menu.

– When the standard display is shown, the lock mode is automatically activated

after 10 seconds.

̈

When the standard display is shown on the display panel, press the

STANDBY

button.

RF Mute On?

” appears on the display panel.

̈

Press the jog dial.
The RF signal is deactivated. “

RF Mute

” flashes in alternation with the standard

display and the display is backlight in red.

̈

Press the

STANDBY

button.

RF Mute Off?

” appears on the display panel.

̈

Press the jog dial.
The RF signal is activated and the display backlighting changes from red to
orange.

Standard -18dB

MHz

PEAK

-10

0

-20
-30
-40

PEAK

-10

0

-20
-30
-40

AF II

AF I

**2000**

552.300

B.Ch: 5.14

EQ

Advertising
This manual is related to the following products: