Sennheiser System 2013 PLL - Manual (Page 33)

Technical data
2.15
Transmitter SK 2013 PLL
Frequency range SK 2013-6-D 8 m frequency band 36.64-37.98 MHz
SK 2013-6-1 8 m frequency band 30-36 MHz
SK 2013-6-2 8 m frequency band 35-40 MHz
SK 2013-6-3 8 m frequency band 39-45 MHz
SK 2013-8 4 m frequency band 72.025-75.975 MHz
SK 2013-9 2 m frequency band 173.350-175.02 MHz
Frequency preparation Phase Lock Loop (PLL) Technique, 16 channels
Frequency constancy
±
2 kHz, -10
°
to +55
°
C
HF output power 10 mW
HF radiation power 1 mW
Perturbing radiation power < 4 nW
Modulation type FM
Rated lift/peak lift
±
8 kHz /
±
10 kHz
Channel grid/switching band width SK 2013-6-D 40 kHz / 2.34 MHz
SK 2013-6-1 40 kHz / 2 MHz
SK 2013-6-2 40 kHz / 2 MHz
SK 2013-6-3 40 kHz / 2 MHz
SK 2013-8 25 kHz / 4 MHz
SK 2013-9 25 kHz / 2 MHz
LF transmission range 40 - 16,000 Hz
Nonlinear distortion factor
at 1 kHz and rated lift
typ. 1 %
LF sensitivity min./max. 4 mV/44 mV - Microphone input
150 mV/2.65 V - Aux. input
Input resistance 3k
Ω
- Microphone input
100 k
Ω
- Aux. input
Operating voltage 2.4 V
Current consumption approx. 55 mA
Operating time > 12 hours with RECHARGEABLE
battery pack BA 2013
> 36 hours with 2 x Alkaline AA cells in B 2013
Battery check red LED for operating voltage < 2.2 V
Dimensions 18 x 58 x 95 mm
Weight (incl. B 2013) approx. 130 g
German ZZF Certification No. A 014 926 B ME (only -6)
Scope of delivery 1 Transmitter SK 2013 PLL
1 Battery compartment B 2013
1 Projection antenna 44891
Also included in the System 2013 (set of transmitter and receiver) are two securing plates
with retaining straps. The System 2013 is supplied in a sturdy transport and storage
carrying case.