Sennheiser System 2013 PLL - Manual (Page 34)

2.16
Technical data
Receiver EK 2013 PLL
Frequency range EK 2013-6-D 8 m frequency band 36.64-37.98 MHz
EK 2013-6-1 8 m frequency band 30-36 MHz
EK 2013-6-2 8 m frequency band 35-40 MHz
EK 2013-6-3 8 m frequency band 39-45 MHz
EK 2013-8 4 m frequency band 72.025-75.975 MHz
EK 2013-9 2 m frequency band 173.350-175.02 MHz
Frequency preparation Phase Lock Loop (PLL) Technique, 16 channels
Modulation type FM
Rated lift/peak lift
±
8 kHz /
±
12 kHz
Channel grid/switching band width EK 2013-6-D 40 kHz / 2.34 MHz
EK 2013-6-1 40 kHz / 2 MHz
EK 2013-6-2 40 kHz / 2 MHz
EK 2013-6-3 40 kHz / 2 MHz
EK 2013-8 25 kHz / 4 MHz
EK 2013-9 25 kHz / 2 MHz
Sensitivity
(measured via artificial antenna)
typ. 0.5
µ
V for 26 dB S/N
Neighboring channel selection typ. 70 dB
LF transmission range 40 - 16,000 Hz
Nonlinear distortion factor
at 1 kHz and rated lift
typ. 1 %
LF output 1: 3.5 mm dia. jack High: 2 x 0.7 V / 32 U
LF output 2: 2.5 mm dia. jack Low (hearing aids): 2 x 3 mV / 2 k
Ω
Impedance at LF output 2
for connection of hearing aids
in normal operation 3 k
Ω
with activated automatic fade-in 80 U to 1 kU adjustable
Operating voltage 2.4 V
Current consumption
approx. 45 mA
Operating time > 14 hours with RECHARGEABLE battery
pack
BA 2013
> 40 hours with 2 x Alkaline AA cells in B 2013
Battery check red LED for operating voltage < 2.2 V
Dimensions 18 x 58 x 95 mm
Weight (incl. B 2013) approx. 130 g
German ZZF Certification No. A 014 926 B ME (only -6)
Scope of delivery 1 Receiver EK 2013 PLL
1 Battery compartment B 2013
Not responsible for errors. Subject to change without notice.