Sanyo SCP-7400 - Manual (Page 142)

6. Respond to the prompt by saying the name or group name.
Ⅲ To place the call, press and hold . (See “Making and
Receiving a Ready Link Call” on page 140 for details.)
Ⅲ To display other Contacts list, press Go to (left softkey),
highlight your desired list, and press
. (See “Selecting
a
Contacts List” on page 140.)
Ⅲ To display the Ready Link options, press Options (right
softkey) highlight your desired option, and press
. (See
“Ready Link Options” on page 146.)
Tip: If you say “Contact” or “Dial Number” during step 3 on the previous page,
you can say following commands continuously (e.g. “Contact, John Jones” or
“Dial Number, 999-999-9999”).
Tip: To redial the last Ready Link call by using ASR with the flip open, press and
hold on the side of your phone and follow the voice prompts.
Tip: You can also make a Ready Link call to Contact, Group, and dialed number by
using ASR with the flip closed. Press and hold , and follow the voice
prompts.
Using Digit Training
This feature allows you to train the phone to recognize your voice.
You can get better recognition accuracy by programming your
intonation pattern into your phone.
To program Digit Training:
1. Press and hold or to activate the Command menu.
2. Say “Digit Training.”
3. Say “Start” to start programming.
4. Follow the voice prompts and recite the digits into your phone’s
microphone. (A voice prompt will indicate the current rate of
adaptation.)
5. Respond to the voice prompt repeatedly until adaptation is
complete. (When you are finished training, you will hear a
confirmation that the adaptation has been successfully
completed.)
Note: Try digit training in a quiet environment for the best results. When you train,
make sure you speak clearly and distinctly in your natural voice.
Section 2I: Using Your Phone’s Voice Services 129