Sanyo SCP-7400 - Manual (Page 167)

Managing Ready Link Settings
Assigning Speed Dialing for Ready Link Entries
To assign Speed Dialing for Ready Link entries:
1. Press to access the main menu.
2. Select Contacts and press .
3. Select Speed Dial #s and press .
4. Select an unassigned number and press .
Ⅲ When you highlight an assigned number and press ,
you’ll be asked whether you want to overwrite the assigned
number. Select Yes or No, or you can also select Unassign to
cancel the stored speed dial.
5. Press Go to (left softkey), highlight the list from which you want
to set a speed dial (Personal List, or Personal Grps.) and press
.
6. Select the contact and press .
– or –
Select the group and press
, select an option, and press .
Ⅲ Assign to assign the selected group as a speed dial.
Ⅲ Details to display the group details. You can select the group
member from the group list.
To use Speed Dial for a Ready Link entry:
ᮣ From standby mode, press the appropriate key and press and
hold .
Restarting the Ready Link Service
To restart the Ready Link service:
1. Press to access the main menu.
2. Select Settings and press .
3. Select Ready Link and press .
4. Select Restart and press .
Section 2J: Using Ready Link 154