Sanyo SCP-7400 - Manual (Page 143)

To activate Digit Training:
1. Press and hold or to activate the Command menu.
2. Say “Digit Training.”
3. Say “On” or press On (right softkey) to activate the existing data.
(A voice prompt will announce the activation of digit training.)
To deactivate Digit Training:
1. Follow steps 1-2 above.
2. Say “Off” or press Off (right softkey) to deactivate the existing
data. (A voice prompt will announce the deactivation of digit
training. The adaptation returns to its default setting.)
Phone Status Command
This feature uses a voice prompt to tell you your phone number and
current signal strength.
To activate Phone Status Command:
1. Press and hold or to activate the Command menu.
2. Say “Phone Status.” (You will hear your phone number and
signal strength.)
ASR Help Command
This feature will help you learn the basics of using automatic speech
recognition.
To activate Help Command:
1. Press and hold or to activate the Command menu.
2. Say “Help.” (You will hear the voice prompts of helpful
instructions for voice call.)
Section 2I: Using Your Phone’s Voice Services 130