Samsung SV-6332X User Manual
Page 15
GB
27
26
Modifying ShowView Programming ★(SV-6333X/SV-6332X/SV-2333X Only)
Using the ShowView Feature ★(SV-6333X/SV-6332X/SV-2333X Only)
Before presetting your VCR:
◆ Switch on both the television and your VCR
◆ Check that the date and time are correct
◆ Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the S
HOW
V
IEW
button.
Result:
A message is displayed to allow you to enter the
ShowView code.
☛
If all six programmes have been set, the message
ALLE
SPEICHERPLÄTZE SIND BELEGT
is displayed. Refer
to page 29 if you wish to cancel a preset recording.
2
Press the numeric buttons to enter the code opposite the
programme that you wish to record in your television magazine.
➢
If you wish to correct the ShowView code that you are
entering:
◆
Press the
➛
button until the digit to be corrected is
cleared
◆
Enter the correct digit
3
Press the MENU or Showview button.
Result:
The information concerning the programme is displayed.
☛
When using the ShowView function for the first time with
stored stations, the programme number flashes. This one
time, you must enter the station number manually by
pressing the
#
or
❷
buttons. Refer to the following page if:
◆
The programme number or times flash
◆
You wish to modify the programme
4
If the programme and times are correct, press the MENU button.
5
Press the STANDBY/ON button to activate the timer.
Result:
The Record indicator (
) is displayed.
☛
If no cassette has been inserted when you press
STANDBY/ON the Record indicator (
) flashes. If the
safety tab on the cassette has been broken, the cassette is
ejected. Insert the appropriate cassette.
6
Refer to page 29 if you wish to:
◆
Check that your VCR has been programmed correctly
◆
Cancel a preset recording
☛
The numbers next to each TV programme listing are
ShowView code numbers, which allow you to
programme your videorecorder instantly with the remote
control. Tap in the ShowView code for the programme
you wish to record.
™ ShowView is a trademark of Gemstar Development Corporation. The ShowView system is
manufactured under licence from Gemstar Development Corporation.
RE
C
UD
IO
SP
EE
D
DUB
TV/VCR
OK
1
V
IPC
+
NICAM
V
IPC
+
NICAM
SHOWVIEW
CODE ---------
CODE:
0-9
ÄNDERN:
➛
WEITER:
MENU
STANDBY/ON EJECT
Q-PRO
SLOW
IPC
SHUTTLE
PROG
1/JAN SA
13:08
PR TAG BEGINN
→→
ENDE
V/P
❿
1 JA 1 17:00
→
18:30SP ON
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
-- ---- --:--
→
--:---- -
#
❷
➛❿
LÖSCHEN:
CLR/RST
MENU
5
★
(SV-6333X/SV-6332X)
PROG
1/JAN SA
13:08
PR TAG BEGINN
→→
ENDE
V/P
❿
1 JA 1 17:00
→
18:30
ON
-- ---- --:--
→
--:-- -
-- ---- --:--
→
--:-- -
-- ---- --:--
→
--:-- -
-- ---- --:--
→
--:-- -
-- ---- --:--
→
--:-- -
#
❷
➛❿
LÖSCHEN:
CLR/RST
MENU
★
(SV-2333X)
If you wish to correct the programme displayed or modify certain elements, such as the recording
speed, you can do so before you press MENU a second time to confirm.
If you wish to...
Then...
Select an input source other
◆
Press the
➛
or
❿
buttons, until the
PR
selection flashes.
than the tuner AV1 or AV2
◆
Press the INPUT button one or more times to change the
input source selection.
Result:
The programme number is replaced by:
•
A1 or A2 for a satellite tuner or external video
input (used by another VCR for example)
➢
The input source must be selected before changing any
other value.
Record a programme every day
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
(Monday to Sunday) at the same time
◆
Press the
#
or
❷
buttons, until the
DLY
(Daily) value is
displayed.
Record a programme every week
◆
Press the
➛
or
❿
buttons, until the
DAY
selection flashes.
on the same day and at the same time
◆
Press the
#
or
❷
buttons, until the
W-
(Week) value is
displayed, followed by the required day.
Example:
W-SA
(Weekly Saturday)
Extend the recording time
◆
Press the
➛
or
❿
buttons, until the
STOP
selection flashes.
◆
Press the
#
or
❷
buttons to increase or decrease the stop
time.
Select VPS recording
◆
Press the
➛
or
❿
buttons, until the
V/P
selection flashes.
◆
Press the
#
or
❷
buttons until the ON or “-” indication is
displayed.
☛
Do not select VPS unless you are sure the programme you
wish to record is broadcast with VPS. If you do set VPS ON
(by selecting “ON” in the right - hand column on the screen),
then you must set up the start-time EXACTLY according to
the published TV schedule. Otherwise the timer recording
won’t take place.
Select the recording speed
◆
Press the
➛
or
❿
buttons, until the recording speed selection
★
(SV-6333X/SV-6332X only)
flashes.
◆
Press the
#
or
❷
buttons until the correct indication is
displayed:
•
AUTO
(Auto Tape Speed Select) : see page 28
•
SP
(Standard Play)
•
LP
(Long Play)