Samsung SV-6332X - Manual (Page 22)

GB
39
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding $ , ❷ or ➛ , ❿ buttons to select the
ZUSATZFUNKTIONEN option.
3 Press the OK button to select this option.
Result:
The ZUSATZFUNKTIONEN menu is displayed.
4 Press the corresponding $ or ❷ buttons, until the cursor is placed
in front of the AUTO-AUS option.
5 Press the ❿ button, until you select the time of Auto Power off
interval.
AUS 2HOUR 3HOUR
6 On completion, press MENU twice to exit the menu.
Auto Power Off
ZUSATZFUNKTIONEN
PROG OPTIONS INSTALL
CLOCK BONUS LANG BONUS
$ ❷!! ➛❿!! OK BEENDEN: MENU
BONUS
❿ AUTO-AUS :AUS
WIEDERHOLEN :AUS
BER. WIEDERHOLEN : 5
$ ❷ ❿ BEENDEN: MENU
38
Using the Assemble Edit Function
SP
OK
2
Recording from Another VCR or Camcorder
RE C AU DIO
SP EE D
DUB TV/VCR
OK
7
6
F.ADV
This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1 Insert the cassette to be edited in your VCR.
2 Press the ❿ ll button to start playback.
3 When you reach the position from which you wish to start the new
recording, press the ❿ ll button.
4 Press the F.ADV ( ) button again as often as necessary to
advance frame by frame, until the exact recording position is
located.
5 While the VCR is in still mode, hold the REC button ( ● ) down for
a while to activate the Assemble Edit function.
Result:
Record symbol flashes in the display.
6 Select the source from which you wish to record by pressing:
◆ The PROG ( $ or ❷ ) buttons for television channels
◆ The INPUT button for the AV1 or AV2
★
(SV-6333X/
SV-2333X only) input sources
7 Press the ❿ ll button to start recording.
8 When you have finished recording, press ■ .
You can copy a cassette to your VCR from another video source,
such as another VCR or a camcorder.
☛
It is an infringement of copyright laws to copy prerecorded
cassettes or to re-record them in any form without the
permission of the owners of the corresponding copyright.
1 Connect the VCR, from which the cassette is to be copied, to the
appropriate SCART audio and video input connectors on the rear
of your VCR, as indicated on page 12.
2 Insert a blank cassette in your VCR.
3 Insert the pre-recorded cassette in the other video source (VCR or
camcorder).
4 Press the INPUT button to select the appropriate input on your
VCR:
◆ AV1 or AV2 ★ (SV-6333X/SV-2333X only) for the SCART input
5 Start playing back the cassette to be copied.
6 Hold REC ( ● ) down for a while to start recording on your VCR.
7 When you have finished recording, press ■ on both VCRs.
➢
If you wish to view the cassette being copied:
◆ Your VCR must be connected as usual to the
television (see page 12 for further details)