Samsung SV-6332X - Manual (Page 17)

GB
31 30
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding # , ❷! or ➛ , ❿ buttons to select the
EINSTELLUNGEN option.
3 Press the OK button to select this option.
Result:
The EINSTELLUNGEN menu is displayed.
4 Press the corresponding # or ❷ buttons, until the cursor is
placed in front of the IPC option.
5 Press the ❿! button to select the IPC (intelligent picture control)
option.
➢
When intelligent picture control mode is EIN , the sharpness
of the image is adjusted automatically.
6 To adjust the sharpness manually, press the ❷ button to turn the
IPC mode AUS .
7 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the BILD
menu disappears automatically.
8 On completion, press the MENU button again.
Intelligent Picture Control
This function allows you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press
❿ II.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3 To... Then press...
Stop the playback ■ (STOP).
Eject the cassette (EJECT).
➢
One Touch Play.
For your convenience, you can playback tape with a
simple touch of the ❿
II (PLAY) button. One Touch Play
can be used even when the power is off but a cassette is
inserted.
SP
OK
Playing a Cassette
2
3
Adjusting Picture Alignment Manually
The Picture Alignment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (
or ) buttons until the picture is clear
and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
DISPLAY V LOCK
CLR/RST F.ADV
INPUT INDEX
TRK PROG
RE
C
MENU
AU DIO
REPEAT
★ (SV-6333X/SV-2333X)
OPTIONS
OSD :EIN
KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
❿ IPC :EIN
16:9
:AUTO
# ❷ ❿ BEENDEN: MENU
★ (SV-6332X/SV-2303X)
OPTIONS
OSD :EIN
KASS. WÄHLEN :E180
FARBSYSTEM :AUTO
❿ IPC :EIN
# ❷ ❿ BEENDEN: MENU
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
1 During playback, press the IPC button on the remote control.
2 Press the ❷ button to turn the IPC (intelligent picture control)
option EIN and AUS .
➢
When intelligent picture control mode is EIN , the sharpness
of the image is adjusted automatically.
3 To adjust the sharpness manually, select intelligent picture control
mode
AUS .
◆ The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
➢
If you do not press a button within ten seconds, the BILD
menu disappears automatically.
5 On completion, press the IPC button again.
Intelligent Picture Control
Q-PRO SLOW
IPC
DISPLAY
SHUTTLE
V-LOCK
CLR/RST F.ADV
1
** BILD **
IPC : EIN
WEICH SCHARF
--------*-----
➛❿ EIN/AUS: ❷