Sony CMT-C7NT - Manual (Page 26)

26
Recording tips (continued) Adjusting the recording level
You can adjust the recording level when
recording to an MD from the tuner or from an
optional component connected to the TAPE IN
or DIGITAL OPTICAL IN jack.
1
Press FUNCTION repeatedly to select
the desired source to record.
2
Press REC/REC IT to stand by for
recording.
3
Press MENU/NO on the remote to
display “Setup?”, and then press
ENTER/YES on the remote.
4
Press . or > repeatedly until
“LevelAdjust?” appears, and then
press ENTER/YES on the remote.
5
Press . or > to adjust the
recording level.
While monitoring the sound, adjust to the
optimum level while making sure that
“OVER” does not appear in the display at
the loudest portion.
6
Press ENTER/YES on the remote.
7
Press MENU/NO on the remote.
8
Press x .
To continue and record, follow the
procedures described on the various
recording pages.
Tips
• You can also adjust the recording level during
recording.
• Once adjusted, the recording level is maintained
until you adjust it again.
1
Press FUNCTION repeatedly until “MD”
appears in the display.
2
Press MENU/NO on the remote.
3
Press . or > repeatedly until
“Setup?” appears in the display, and
then press ENTER/YES on the remote.
4
Press . or > repeatedly until
“S.Space Off” (or “S.Space On”)
appears, and then press ENTER/YES on
the remote.
5
Press . or > repeatedly to select
the setting, and then press ENTER/YES
on the remote.
To Select
Turn on the Smart
Space function S.Space On (factory
setting)
Turn off the Smart
Space function S.Space Off
6
Press MENU/NO on the remote.
To continue and record, follow the
procedures described on the various
recording pages.
Tip
To restart the recording when “Auto Cut” appears in
the display, press u (or X on the remote).