Sony CMT-C7NT - Manual (Page 28)

28
Recording into a new group
You can create new groups by CD album or
artist, etc.
1
Do steps 1 to 3 of “Recording a CD on
an MD” on page 19.
2
Do steps 2 to 5 in “Programming the
CD tracks” on page 11.
3
Press GROUP ON/OFF on the remote.
“GROUP” lights up.
Press TIME to display the remaining
recordable time.
4
Press REC/REC IT.
“New Group” flashes and the deck changes
to recording pause.
5
Press u .
To continue and record into another new
group, press x repeatedly after the
recording to display the disc name and the
total number of groups, then do steps 4 and
5.
If “Group Full” appears when you
press REC/REC IT in step 4
You cannot start recording because there is
insufficient character space for group
management.
Delete the unnecessary characters (disc name
or track names) until group recording is
possible (see page 31).
Notes
• The new group is added after any existing groups
with tracks registered into them.
• Up to 99 groups can be registered on a single MD.
• If “Group Full” appears while recording, track
numbers are not marked.
Recording CD tracks on an MD as
group tracks (continued) Recording into an existing
group
1
Do steps 1 to 3 of “Recording a CD on
an MD” on page 19.
2
Do steps 2 to 5 in “Programming the
CD tracks” on page 11.
3
Press GROUP SKIP on the remote
repeatedly until the group you want to
record in appears.
4
Press REC/REC IT.
“New Track” flashes and the deck changes
to recording pause.
5
Press u .
If “Group Full” appears when you
press REC/REC IT in step 4
You cannot start recording because there is
insufficient character space for group
management.
Delete the unnecessary characters (disc name
or track names) until group recording is
possible (see page 31).
Notes
• The recorded tracks is added to the end of the
group.
• When you newly record a track into an existing
group, the track numbers following the newly
recorded track may change when the Group
function is turned off.
• If “Group Full” appears while recording, track
numbers are not marked.