SATO CG 408 - Manual (Page 20)

CONFIDENTIAL. VERSION: S-CG4-01rA-01-2010PG © 2010 SATO Corporation. All rights reserved.
The ribbon unit serves to load the ribbon and
wind up the used ribbon.
Pull the lever on the middle of the ribbon unit
toward you to pull out the ribbon unit.
For more detailed instructions on loading
ribbons, refer to the Quick Guide or
Operator’s Manual.
Ribbon Unit The placement of the ribbon under the cover does
not interfere with the printer controls. It gives the
operator wider access to the inside of the printer.