SATO CG 408 - Manual (Page 3)

CONFIDENTIAL. VERSION: S-CG4-01rA-01-2010PG © 2010 SATO Corporation. All rights reserved.
DISCLAIMERS AND CONFIDENTIALITY
SATO is a registered trademark of SATO Corporation. Other product and corporate names used in this
publication may be trademarks or registered trademarks of other companies, and are used only for
explanation and to their owner’s benefit, without intent to infringe.
SATO has made a good faith effort to present the most accurate and timely information available.
Competitive information contained in this publication is based on public data sources available at the
time of publication. SATO shall not be responsible for any inaccuracies or omissions in this information,
including, but not limited to, information obtained from other companies’ publications, the press, and
other third party organizations.
All information in this publication is subject to change without notice, and does not represent a
commitment on the part of SATO. No part of this document may be reproduced for any purpose or in any
form, including electronic storage and retrieval, without the express permission of SATO. This document
should be considered confidential and not distributed to any third parties. This document is intended
solely for the use of SATO agents and representatives.
The acronyms used to identify the programming languages of non-SATO products may be the property
of their respective companies and are used here to identify their various programming languages, used
only for explanation without intent to infringe. SATO makes no claims to the authenticity of their
command language or functionality. SATO has made a good faith effort to present the most accurate and
timely information available. Competitive information contained in this publication is based on public
data sources available at the time of publication. SATO shall not be responsible for any inaccuracies or
omissions in this information, including, but not limited to, information obtained from other companies’
publications, the press, and other third party organizations. Copyright 2009, SATO Corporation. All rights