Samsung BN68-01691A-02 - Manual (Page 126)

English - 124
Access Point Select
You can select the IP sharer to use when using a wireless network.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Access Point Select”, then press the
ENTER button.
The wireless Access Points that exist in you area are searched and
displayed in the Access Point List.
4. Press the ▲ or ▼ button to select the Access Point to use. Then press the
ENTER button.
If a wireless Access Point is not in the Access Point list, press the Red
button.
When the connection is made, you will be returned to the screen
automatically.
If you selected an Access Point that requires security authentication, enter
the security key.
You can enter up to characters for a security key.]
The character set may differ and the red button may not appear
depending on the Access Point.
If you have selected an Access Point with a security authentication:
- The Security Key input screen appears.
- Enter the security key and press the
ENTER button.
- Using the Remote Control Buttons on the Security Key Input Screen
Button Operations
Wheel
(▲/▼/◄/►)
Moves the selection up/down/left/right.
ENTER Enters (Inputs) the selected character.
RED
Switch between Upper- and Lower-Case
Letters
GREEN
You can delete an already entered
character.
BLUE
Press this button to finish entering the
security key.
➣
➣
➣
➣
➣
➣
➣
Setup
Network selection : Wireless
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Energy Saving : Off
PIP
Software Upgrade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select
: AP 1 ►
IP Address : 0 0 0 0
Subnet Mask : 0 0 0 0
Gateway : 0 0 0 0
DNS Server : 0 0 0 0
Enter Move Return
Securty Key _
Number
Delete
Done 0~9 A B C D E F
Select Return Move
Wireless Network Setup
1 ~ 9 Number
Wireless Network Setup
Access Point Select 1/5
Select Return
 Search
AP 1
AP 2 WEP
AP 
AP 4
Move
Wireless Network Setup
Access Point Select 1/5
Select Return
 Search
0016018F0176
ALKO_AP WEP
NESPOT
AP4
Move
Connected.
Access Point Name : AP1
OK
BN68-01691A-00Eng.indb 124 2008-07-18 �� 10:25:29