Samsung BN68-01691A-02 - Manual (Page 63)

English - 61
Setting the On/Off Timer
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER
button.
Press the ▲ or ▼ button to select “Time”, then press the ENTER button.
2. Three different On/Off Timer Settings can be made.
Press the ▲ or ▼ button to select “Timer 1”, “Timer 2” or “Timer 3”, then
press the ENTER button.
3. Press the ◄ or ► button to select the desired item below.
Press the ▲ or ▼ button to adjust the setting.
On Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Off Time: Set the Hour, Minute, am/pm, and Activation/Inactivation.
(To activate timer with the setting you’ve chosen, set to “Activate”.)
Volume: Set the desired volume level.
Contents: When the “On Time” is active, you can turn on a specific
channel or play back contents such as photo or audio files.
TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
Antenna: Select “Air” or “Cable”.
Channel: Select the desired channel.
Music: Select the folder containing MP3 files on the USB device.
Photo: Select the folder containing JPEG files on the USB device.
Repeat: Select “Once”, “Everyday”, “Mon~Fri”, “Mon~Sat”, “Sat~Sun”,
or “Manual”.
When “Manual” is selected, press the ► button to select the
desired day of the week. Press the ENTER button over the
desired day and the mark will appear.
•
•
•
•
–
–
–
–
–
•
➣
Press the EXIT button to exit.
You can set the hour, minute and channel by pressing the number
buttons on the remote control.
Auto Power Off
When you set the timer On, the television will eventually turn off, if no
controls are operated for 3 hours after the TV was turned on by the
timer. This function is only available in timer On mode and prevents
overheating, which may occur if a TV is on for too long time.
When executing automatic power- on with scheduling a time and 2 USB
devices that have same manufacturer and folder name one another are
simultaneously connected, Other USB device can be read.
➣
➣
➣
Setup
Plug & Play
Language
: English
Time
Network selection : Cable
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment
: Off
Contents
TV
TV/USB
am
Channel
None
Music
Return Enter Adjust Move
Cable
Antenna

Channel
None
Photo
Time
Clock : 12 : 00 am
Sleep Timer : Off
Timer 1 : Inactivated ►
Timer 2 : Inactivated
Timer 3 : Inactivated
Return Enter Move
Timer 1
12 00 am Inactivate
00 am Inactivate
On Time
Off Time
12
Once
Return Enter Adjust Move
TV Cable 3
Volume
10
Contents
Repeat Sun Mon Tue Wed Thu Fri Sat
BN68-01691A-00Eng.indb 61 2008-07-18 �� 10:24:36