Samsung BN68-01691A-02 - Manual (Page 24)

English - 22
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in
different modes: TV, VCR, DVD, Set-Top Box. Pressing the corresponding
button on the remote control allows you to switch between these modes and
control whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, and Set-
Top Boxes.
Setting Up the Remote to Operate Your VCR
1. Turn off your VCR.
2. Press the MODE button and make sure that the VCR LED is illuminated.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the VCR
code listed on page 24 of this manual for your brand of VCR. Make sure you enter
three digits of the code, even if the first digit is a “0”.
(If more than one code is listed, try the first one.)
. Press the POWER button on the remote control.
Your VCR should turn on if your remote is set up correctly.
If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of VCR.
If no other codes are listed, try each VCR code, 000 through 080.
Note on Using Remote Control Modes: VCR
When your remote control is in VCR mode, the volume buttons still control your
TV’s volume.
Setting Up the Remote to Operate Your DVD
1. Turn off your DVD.
2. Press the MODE button and make sure that the DVD LED is illuminated.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the DVD
code listed on pages 25 of this manual for your brand of DVD.
Make sure you enter three digits of the code, even if the first digit is a “0”.
(If there is more than one code listed, try the first one.)
. Press the POWER button on the remote control.
Your DVD should turn on if your remote is set up correctly.
If your DVD does not turn on after set up, repeat steps 2, 3 and 4, but try one of
the other codes listed for your brand of DVD.
If no other codes are listed, try each code, 000 through 141.
Note on Using Remote Control Modes: DVD
When your remote control is in DVD mode, the volume buttons still control your
TV’s volume.
➣
➣
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
BN68-01691A-00Eng.indb 22 2008-07-18 �� 10:24:19