Sony SLV-E180EG - Manual (Page 26)

Basic Operations
Basic Operations
25
2
Set the date, start and stop times and
programme position.
1 Press ? / / to flash each item in turn.
2 Press > / . to set each item.
To correct a setting, press ? to return to
that setting and reset.
• To record the same programme every day or the same day every
week, see “Daily/weekly recording” on page 26.
• To record from a source connected to the LINE-1 (TV) connector,
press INPUT SELECT to display “L” in the “PROG” position.
3
Press OK.
4
Press ON/STANDBY to turn off the VCR.
The indicator appears in the display window and the VCR
stands by for recording.
To record from a source, leave the connected equipment switched
on.
To stop recording
To stop the VCR while recording, press p STOP.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press ON/STANDBY.
The
indicator turns off and the VCR switches on. Remember to press
ON/STANDBY to reset the VCR after using the VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
PAUSE
STOP
FF REW PLAY
OK
PAUSE
STOP
FF REW PLAY
OK
t T I M E R 1 1 . 1 2 F R
D A T E T I M E P R O G
T O D A Y 1 9 : 0 0
b 2 0 : 0 0 3 5
S E L E C T : B b
S E T : V v
O K : O K
ON/
STANDBY
continued