Troubleshooting (continued) – Sony SLV-E180EG User Manual

Page 39

Advertising
background image

38

Additional Information

Symptom

A tape cannot be inserted.

The remote commander does
not function.

The tracking meter does not
appear on the screen.

The VCR needs to be cleaned.

Others

Remedy

• Check that a tape isn’t already in the tape

compartment.

• Make sure you are pointing the remote commander at

the remote sensor on the VCR.

• Replace all the batteries in the remote commander with

new ones if they are weak.

• Make sure the

[TV]

/

[VIDEO]

remote control switch is set

correctly.

• The recording condition of the tape is very poor and

tracking cannot be adjusted or the NTSC system is
being used.

• Clean the cabinet, panel and controls with a dry, soft

cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine.

Troubleshooting (continued)

Advertising
This manual is related to the following products: