Sunrise Medical User Manual - Manual (Page 23)

23
Microsoft Windows 2000: Setting up a LAN connection.
In order to be able to use a LAN connection between your PC/laptop and the sunrise surf & talk box, the following
steps are required:
1. Connect network cable
2. Confi gure LAN connection
3. Deactivate any proxy server
Step 1 – Connect network cable
1. Insert the network cable into the appropriate port on your computer.
2. Insert the other end of the cable into the jack marked LAN on the sunrise surf & talk box.
Step 2 – Confi gure LAN connection
1. Click on the START button of the taskbar of your computer and select Settings > Network and Dial-up Con-
nections.
2. Right-click on LAN Connection and select Properties from the context menu.
3. Make sure that on the General tab the box for Internet Protocol (TCP/IP) is checked.
4. Highlight Internet protocol (TCP/IP) and click on the Properties button.
The Internet Protocol (TCP/IP) Properties dialogue is opened.
5. On the General tab, click on the Obtain an IP address automatically option fi eld and then click on the OK
button.
6. In order to save the confi guration, click on the OK button in the Local Area Connection Properties dialogue.
You will be asked, if necessary, to restart your computer.
Step 3 – Deactivate proxy server
If you use a proxy server for access to the Internet, deactivate it.
Note: The following describes the procedure for Microsoft Internet Explorer. If you use a different browser, ple-
ase read the appropriate user documentation.
1. Start Internet Explorer.
2. Select Tools > Internet Options.
The Internet Options dialogue is opened.
3. Click on the Connections tab.
4. Click on the LAN Settings button in the Local Area Network (LAN) Settings area.
The Local Area Network (LAN) Settings dialogue is opened.
sunrise surf & talk Setting up connections