Sunrise Medical User Manual - Manual (Page 32)

32
Conducting the self-test.
The sunrise surf & talk box will conduct a self-test, if desired. This test checks the major hardware and software
components of the device. If problems are found, they are then described in the administration interface.
This is how you conduct the self-test of the sunrise surf & talk box
1. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25).
2. Click on the Firmware tab in the Status menu.
Under Self-test of the sunrise surf & talk box you will fi nd a list of problems found and the affected system
components. In addition, an error code will be displayed to describe an internal system condition. This informa-
tion will help Technical Support to solve your problem.
3. To leave the administration interface, simply close your browser.
Updating fi rmware.
Firmware updates for the sunrise surf & talk box are provided by sunrise. You can download the updates at www.
sunrise.ch/surfandtalk
Note: When installing a fi rmware update, the sunrise surf & talk box is reset to factory settings. All user-defi ned
settings (e.g. a changed password) are then lost. Then the password will again be «admin».
This is how you update the fi rmware
1. Start your browser.
2. Enter www.sunrise.ch/surfandtalk into the address line of your browser and confi rm the entry with ENTER.
3. Search for available updates using the search function of this website.
4. Download the update fi le and store it on your PC/laptop.
5. Log in to the administration interface of sunrise surf & talk box (see Logging in and logging out, pg. 25).
6. Click on the Firmware tab in the Tools menu.
7. Select the update fi le you would like to download using the Browse button.
You can also manually enter the fi le path into this fi eld.
Please note! The installation of the fi rmware update is a sensitive process. Make sure that the update fi le was
completely downloaded and is not damaged. Furthermore, it is important that the sunrise surf & talk box is not
turned off during the update.
8. Click on the Start button and wait until the installation of the fi rmware update is completed.
The sunrise surf & talk box will restart.
sunrise surf & talk Basics of Administration