Replacing the battery – SUUNTO t1 User Manual

Page 28

Advertising
background image

Attach the buckle to the strap by placing the spring bars into the holes in the strap. In both
sides of the buckle are holes for two different positions. This can be used for fine tuning of the
strap length. Make sure that the spring bars are positioned straight in the buckle.

5.4. Replacing the battery

Your Suunto t1 operates on a 3-Volt lithium cell, type: CR 2032. The life expectancy is approximately
12 months of operation with an average of 4 hours of training a week. The higher your average
amount of training hours a week, the shorter the battery's life expectancy will be.

NOTE

To reduce the risk of fire or burns, do not crush, puncture or dispose of
used batteries in fire or water. Only replace them with manufacturer-
specified batteries. Recycle or dispose of used batteries properly.

26

Advertising