SUUNTO t1 - Manual (Page 29)

5.4.1. Replacing the battery of the Suunto t1
To replace the battery:
1. Use a coin to open the battery compartment on the back of your Suunto t1. Ensure that the
O ring and all surfaces are clean and dry.
2. Remove the old battery.
3. Place the new battery into the battery compartment with the positive side facing up.
4. Slide the battery gently against the contact plate on the side, ensuring that it does not break
or bend out of place.
5. When replacing the cover, rotate it carefully counter-clockwise with your thumb in order to
align the threads. The cover should rotate easily at first without having to use force. If you
have to use force right at the start, the threads are misaligned and the threads may be
damaged.
6. Perform the final tightening with a suitably sized coin.
NOTE The markings on the cover may be left unaligned once the cover has been
tightened. If the old cover is undamaged, it does not need to be replaced.
NOTE If the threads of the battery compartment cover are damaged, please send
your device to an authorized Suunto representative for service.
27