Sony MZ-R35 - Manual (Page 30)

30
-EN
Cause/Solution
•Disc playing stopped before it came to the last track.
b Press = repeatedly or open and close the lid
once to go back to the beginning of the disc, and
restart playing after checking the track number in
the display.
•The recorder is placed where it receives continuous
vibration.
b Put the recorder on a stable place.
•A very short track may cause sound to skip.
•Strong magnetism from a television or such device is
interfering with operation.
b Move the recorder away from the source of strong
magnetism.
•You pressed P after pressing = or +.
b Press P before pressing = or +.
•The rechargeable battery has been inserted
incorrectly or the AC power adaptor has been
connected incorrectly.
b Insert the battery correctly or connect the AC
power adaptor correctly.
•The built-in battery for the clock is weak.
b Connect the AC power adaptor to DC IN 6 V on
the recorder and the wall outlet to charge the
built-in battery. After charging, set the clock again
(page 15). Note that the clock may lose or gain up
to about 2 minutes per month under normal
condition.
Symptom
An MD is not played from
the first track.
Playback sound skips.
Sound has a lot of static.
Cannot find the track
marks.
Charging the rechargeable
battery does not start.
The clock loses time or the
display flashes.
The recording date was not
stamped onto the disc.