Sony Trinitron KD-32DX40U - Manual (Page 20)

Advanced Operation
18 Advanced Operation
Parental Control
This feature allows you to set an age limit for programmes on the TV. If any films or programmes classed
above the age limit you have set are broadcast, you will be requested to enter your PIN code before
viewing is allowed.
In order to use the ‘Parental Control’ feature you must first set your PIN code.
If you have not already set a PIN code:
1. Press the button on the remote control to display the ‘Digital INFO display’. Press the BLUE
button to display the ‘Main Menu’.
2. Press the V or v button to highlight ‘Parental Control’ then press the OK button to display the
‘Parental Control’ menu.
3. Press the RED button to display the PIN entry box on screen.
4. Using the numbered buttons on the remote control, enter a 4-digit number of your choice. As you
enter each digit it will be represented by a * in the PIN entry box. Enter the code again to confirm.
Note: This will be your PIN number for the future - please use a number you can easily remember.
5. Press the OK button to confirm your PIN code.
6. Press the BLUE button to return to the ‘Detail Set-up’ menu.
7. Press the BLUE button to return to the ‘Main menu’.
Follow Steps 2-5 of the instructions below:
If you have already set a PIN code:
1. Press the button on the remote control to display the ‘Digital INFO display’. Press the BLUE
button to display the ‘Main Menu’.
2. Press the V or v button to highlight ‘Parental Control’ then press the OK button to display the
‘Parental Control’ menu.
3. Using the numbered buttons on the remote control, enter your 4-digit PIN code. As you enter each
digit it will be represented by a * in the PIN entry box. Press the OK button to confirm your PIN code.
4. With the ‘Age’ box highlighted, press the V or v button to set the age limit you desire then press the
OK button to confirm your setting.
5. Press the BLUE button to return to the ‘Detail Set-up menu’.
6. Press the BLUE button to return to the ‘Main menu’.
7. Press the BLUE button on the remote control to remove the ‘Digital INFO display’ from the TV
screen.
Auto Tuning
This feature allows you to automatically re-tune all available Digital channels.
1. Press the button on the remote control to display the ‘Digital INFO menu’. Press the BLUE button
to display the ‘Main Menu’.
2. Press the V or v button to highlight ‘Auto Tuning’ then press the OK button to display the ‘Auto
Tuning’ menu.
3. Press the RED button to begin tuning in all available Digital channels.
Note: If you wish to cancel the ‘Auto Tuning’ process, press the BLUE button.
VIDEO / TV /
DIGITAL
1 2 3
6 5 4
7 8 9
0
OK
OK
DX40 Pages 11-20.fm Page 18 Wednesday, August 22, 2001 12:07 PM