Sony Trinitron KD-32DX40U - Manual (Page 21)

Advanced Operation
Advanced Operation 19
Detail Set-up
The ‘Detail Set-up’ menu allows you to further customise your TV with the following features:
Manual Tuning
This feature allows you to select a channel number from the displayed list and change the digital services
of that channel.
1. Press the button on the remote control to display the ‘Digital INFO display’. Press the BLUE
button to display the ‘Main Menu’.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to display the ‘Detail
Set-up’ menu.
3. Press the V or v button to highlight ‘Manual Tuning’ then press the OK button to display the ‘Manual
Tuning’ menu.
4. Press the V or v button to highlight the chosen channel number for your new channel. If you do not
wish to select any of the programme numbers listed, press the RED or GREEN button to display the
previous or next 5 programme numbers on the list.
5. With your channel number highlighted, press the OK button to display the ‘Manual Programme
Search’ screen.
6. Press the V or v button if you wish to change the channel number, then press the b button to make
the select search box active.
7. Press the V or v button to begin the search process. The words ‘Searching Down’ or ‘Searching Up’
appear in the select search box to indicate that the TV is searching. If no Digital services are found
on the channel you have chosen, the channel number changes up or down automatically and the
search continues. When all services allocated to the selected channel have been found, the service
selection screen is displayed.
8. Press the V or v button to find and highlight the service you wish to allocate to the channel number
selected in Step 4, then press the OK button to display the channel selection screen.
9. Repeat Steps 4 to 8 if you wish to manually add more channels to your TV.
10. Press the BLUE button on the remote control three times to remove the ‘Digital INFO display’ from
the TV screen.
PIN Code
This feature allows you to set a 4-digit PIN code.
1. Press the button on the remote control to display the ‘Digital INFO display’. Press the BLUE
button to display the ‘Main Menu’.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button to display the ‘Detail
Set-up’ menu.
3. Press the V or v button to highlight ‘PIN Code’ then press the OK button to display the ‘PIN Code’
menu.
4. Enter your PIN code using the numbered buttons on the remote control. If you enter a wrong number,
press the RED button to clear and start again.
5. Once you have entered a 4-digit code a cursor will appear in the second PIN Code box. Enter your
new PIN code once again as confirmation. Press the OK button to confirm.
6. When both PIN codes match, a message appears to inform you that your new PIN code has been
accepted. This is the PIN code you must use in future.
7. Press the BLUE button on the remote control to remove the ‘Digital INFO display’ from the TV
screen.
Note: If you have forgotten your PIN code, please use 9999. This PIN code will always be accepted.
VIDEO / TV /
DIGITAL
1 2 3
6 5 4
7 8 9
0
OK
VIDEO / TV /
DIGITAL
OK
DX40 Pages 11-20.fm Page 19 Wednesday, August 22, 2001 12:07 PM