Specifications, 4 specifications – SIGMA LBA-708 User Manual
Page 13
1.4 Specifications
ENVIRONMENTAL
Operating Temperature:
0 °C to +50 °C
Storage Temperature:
-55 °C to +75 °C
Humidity:
95%
non-condensing
POWER REQUIREMENTS
PCI bus loading:
+5 Vdc @ 350 mA., +3.3Vdc @ 50mA.
+12 Vdc @ 140 mA.* (w/o camera)
-12 Vdc @ 110 mA.
Power consumption:
4.75 watts (w/o camera)
*Total PCI load on +12 Vdc w/camera not to exceed 500 mA.
WEIGHT
Net:
Approximately
0.23
kg
(0.5
lb.)
Shipping:
Approximately 1.4 kg (3 lb.)
INSTRUMENT CHARACTERISTICS
Video Input:
75 ohm Termination, ±5 volts dc max
Trigger Input:
edge sensitive (positive or negative), max input +12 Vdc, lower
threshold 1.1Vdc, upper threshold 2.5 Vdc, minimum pulse
width 10µs.
Trigger Output:
+5 or +12 Vdc (positive or negative),
pulse width 700µs +/- 70µs.
Video Gain Adjust
.8 to 1.4 w/ LBA-7XX; .8 to ~5 w/LBA-300/400/500
Pass/Fail Output
+5 or +12 Vdc positive pulse, 250ms
Shutter Control Outputs
TTL positive logic
Operator’s Manual
LBA-PC
Doc. No. 10654-001, Rev 4.10
13