SIGMA LBA-708 - Manual (Page 245)

Message Error Type Description
Operator’s Manual LBA-PC
Doc. No. 10654-001, Rev 4.10
245
used as the reference frame.
current configuration and
Replace=false
different camera
resolution
EXECUTION_ERROR FRM,LDD,SDD - The specified
frame was captured at a
different camera resolution
than the current configuration
and Replace=false
cannot set while
running EXECUTION_ERROR The specified value(s) cannot
be set while the LBA-PC is
running
CAM file error EXECUTION_ERROR CAM - There was an error
reading a specified CAM file
(check path, filename,
contents)
file name
contains illegal
characters
EXECUTION_ERROR LDD, SDD, DIS
directory path
does not exist
EXECUTION_ERROR LDD, SDD, DIS
error in
directory path or
file name
EXECUTION_ERROR LDD, SDD, DIS
file error EXECUTION_ERROR LDD,SDD - An unknown error
occurred while reading or
writing respectively the file.
file does not
exist
EXECUTION_ERROR LDD, DIS
Not a valid LBA-
PC data file
EXECUTION_ERROR LDD, SDD
cannot write to
file created by
previous version
of LBA-PC
EXECUTION_ERROR SDD
This is not a
Demo frame
EXECUTION_ERROR LDD, SDD - The
demonstration version of the
LBA-PC cannot read or write
files created by the
commercial version.
Invalid frame
size EXECUTION_ERROR REF - The frame is not a
normal LBA-PC frame size (i.e.
120x120 .LBA) and cannot be