Sony 560TVL - Manual (Page 16)

COLOR CCD CAMERA User’s Manual 31 COLOR CCD CAMERA User’s Manual 30
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible
to view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the
screen, remove the high light to see license plates clearly.
3. Select a desired mode using the Left and Right
buttons and press the SET button.
Select ‘BLC’ to adjust the area to be enhanced
and enhancement level.
HLC : Enable a user to select a mask color of
high light area from a picture.
OFF : Not being used
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and
Down buttons so that the arrow indicates ’SSNR’ .
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
SSNR
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT OFF
5.SSNR ON
6.DAY/NIGHT AUTO
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
BLC ON BLC OFF
• Because there can be a difference in the effectiveness of HLC according to the
amount of light area in the screen, optimize the installation angle for the best HLC
performance.
• In a dark environment, the HLC is only activated when a high light that is larger
than a certain area is present.
• The HLC is not activated in light or overly dark conditions.
Notes
How to Use the Camera
HLC MASKING AREA
HLC ON HLC OFF